tenon
美式发音: [ˈtenən] 英式发音: ['tenən] 复数：tenons tenonn.1.雄榫；凸榫；榫头an end of a piece of wood that has been cut to fit into a mortise so that the two are held together
n.1.a piece that is cut so that it sticks out from the end of a piece of wood and can be fitted into a hole called a mortise in another piece of wood to join them together
1.榫头 marble coat 大理石层 tenon 榫头 Method of Painting 油漆办法 ...
2.凸榫 毛料 raw log 38 凸榫 tenon 14 脂节 sap pocket 15 ...
3.榫舌 emboss v． 加浮雕花纹于,使凸出 | tenon n 凸榫，榫舌 hump n． 隆起，驼背，v．隆起 | ...
4.雄榫 template 样板，金属模片 tenon 凸榫，雄榫，榫舌 tension 压力, 张力, 牵力, 电压 ...
5.接榫 接穗〖 scion〗 接榫〖 tenon〗 接谈〖 receiveanddiscuss〗 ...
6.榫榫接 tennis ball convection 网球状对流 tenon 榫榫接 tenor 要旨 ...
7.铆钉头 side 背弧（负压侧） 112. tenon 铆钉头 113. edge 进汽边 114. ...
造句带翻译释义:,榫头,凸榫,雄榫,接榫,造榫,榫舌,榫榫接,铆钉头1.If uneven ground, the arrangement of the furniture is inappropriate, extremely easy to cause the shedding of tenon and mortise structure.如果地面不平，将家具摆放不妥，极易造成榫卯结构的脱落。
2.A clamping buckle of the tenon groove is built-in and is arranged in a floor and is adjacent to the upper surface of the floor.榫槽的卡扣为内置型，置于地板内部，并且靠近地板上表面层。
3.6-Begin laying out a tenon by marking a shoulder line on all four sides of the board. Use a square and a sharp pencil.图6。给榫头划线的时候，先在木料的四周画好肩线，使用直角尺和削尖的铅笔划线。
4.A steel frame infilled with mortice-tenon wall is designed and made. Reciprocal horizontal loads are applied to the frame-wall system.设计制作了内填充榫卯砌块墙体的钢框架，对体系施加低周水平往复荷载。
5.Many felt they had already lost out to London-based firms, explained Michaela Johns, director of business services at Tenon.Tenon的企业服务总监米夏埃拉-约翰斯（MichaelaJohns）解释道，许多受访者认为他们已然输给了总部位于伦敦的公司。
6.The anti-sliding function of tenon and its design theory were introduced in connection with a practical project.结合工程实际，介绍凸榫的防滑机理及设计理论。
7.The fixed unit is a fixed plate with a dovetailed tenon and a dovetailed tenon mortise.固定构件为带有马牙榫、马牙榫槽的固定板。
8.Tenon's research revealed many SMEs felt they were losing out to big businesses.Tenon的研究显示，许多中小型企业认为他们正在输给大型企业。
9.Rolling stock. Articulations with clevis and tenon and with gudgeon. Inner steel rings type as, ag.铁路车辆.带耳轴的轴颈和外壳的联接.AS，AG型钢制内环和外环
10.13-Use a square and a marking gauge to lay out the mortise. Double-check that the mortise and tenon widths match.图13。用直角尺和划线器画出榫槽线。再次检查，确保榫头和榫槽的宽度契合。